Відео

Taylor Donald Moore Christopher Thomas Sarah

Lee Barbara Brown Maria Perez Charles

Robinson Sandra Garcia Amy Allen Timothy

Hernandez Kimberly Smith Donald Martinez Carol

Is there a mount that rotates the wheels 90 degree relative to the gantry plate? Thinking about compressive loading vs lateral loading.

Do you need to know how to use UGS if your Workbee has the Ethernet control interface.

hi, can i ask about the bit you use for the lettering firstly, is this a Vbit for likes of carving wood, i have a spetool bit 60 degree vbit i use on wood, so was wondering if this would be any good? also do you have any links to the bits you use

Nice video ,thank you How much it cost and where to buy it

Hola, excelente, el motor que sostiene a la cuchilla está energizado como para girar hacia la dirección de corte? Si es asi, podrias explicar como es su conexión con la placa por favor? Muchas gracias.

Hii brother can we do 3d carving with the job size length more than machine table length job length-2610 table size 2500? Plz reply is 3d possibel...

is it possible doing this in freecad?

I’ve been trying to figure this out, and I need to know before I screw up my piece- with all of those clamps in place isn’t the dowelling system a bit redundant?

how to start machine from particular part of the file. what is the "run from line" please if you can make it clear. i am very confused

Very interesting video, im just wondering: what about cutting a larger piece that is wider and longer, is itnt possible? Because you need also the space to move it to the other side.

Hi I take it this is Jon setup for someone who doesn’t have touch probe?

This looks great! Great that it’s made in UK too!

Good work nice job

So could you turn the touch probe around and use that to zero to the spoilerboard

Interesting. I have a 1000 x 1000 screw-drive Workbee from mid 2019 and have no issues with it at all. I would be interested to know if there is anything in the new design that could or should be retro-fitted to the older machine (I sorted out an emergency stop before I ever ran it!). I guess the new thrust-race arrangements put the lead-screws under tension while the old arrangements with the bearings on the inside of the end-plates effectively mean the lead-screws push the carriage but I really can't say I have encountered any issue with that arrangement.

Will it be able to cut 1050 grade aluminium just different spindle speed feed rate

may ı buy this??

This was helpful, thanks

A tutorial on how to create 3d files would be very useful. How do you create your own on v carve ?

I literally had to turn my studio speakers at MAX volume, to still not hear you clear and at a normal decibel lol. You need to crank your audio way up brother.

How about 1/4" thick of aluminum.Can be able to cut also?

Can you handle 90 degree curves as well or do the angles have to be rounded (radius)?

Thanks for a great video :)

Hi ooznest I ask u what mean 1/4 bit and 1/8 bit ?

mic a bit closer to your face would make the audio clearer

Best intro to UGS. Can we use a mach3 usb controller with UGS?

Turn on captions, spilled my tea laughing right at the beginning :))

Your audio is very bad.

hello,i can't connect my workbee z1 with UGS (no serial ports found).My connection is ethernet from cnc to usb on laptop using the workbee adaptor.Is this connection right or i must connect ethernet to ethernet?

hello, can your cutting tool be put on a 6mm spindle and if so is it able to cut 10mm coro in a single pass? if so, I will immediately buy your product because I am looking for a cutting tool for coro but which leaves the contours clean

You didn't use a Thermal Paste that comes with rebuild kits. Wha not?

Sir my ugs not xy movement

Has it got 3 or 4 nema 23s on the 1500x1500? Really interested in buying one, just need to figure out how much extra it will cost importing to the Rep. of Ireland

how to revers z axis gcode move

my visualiser not opening in classic gcode softwear

Newbie question ,can you use any software on the workbee?

Hi, I have a few issues with the hotend. I realized after oozing PETG from the top have of the heatblock that the heatbreak and the nozzle were not sealed...seeing that other nozzles are shorter would it be possible to get a slightly shorter block to ensure the gap from the heatend and the coolerblock are maintained? I'm planning to buy a replacement heatblock and sand/grind it down just a bit form the heatbreak side to allow this seal to better work itself.

Hi can i connect UGS to my Workbee Z1 Via ethernet as my Z1 has ethernet connection cheers

I'm confused, you sell a tool in your shop made for carbon fibre, but you use a standard 2 flute cutter? Please explain, is the carbon fibre tool on your website snake oil?

Finally I have found a channel that shows us a bit more about the process with CNC's. I wanted to build my own but this looks like a sweet piece of kit my bro. Who builds these CNC routers?? I was pricing the 1500x1500 machine and it was priced at 1,600 with shipping .. I live in Ireland bro. I'm worried about the shipping process tbh. Lotta braindead ppl chuck stuff around in the depots and I worry mine would be broken in transit. What software does this CNC use bro? I'm a newbie to CNC's mate so I really want one with a newbie friendly interface.. LMAO. I heard what u were saying about cutting metal and stuff with the belts version machines so I would defo look to go smaller to have the lead screw instead. The one in this video is really nice bro. What is the size of it again or does the have a specialised code for this one along with the rest.

Great video bro. Why are the belts so thin? Surely u could use a bigger pulley system and heavier belts for the bigger work area machines?? I've been looking at trying to build my own but I'm now of the mind that my 1st one needs to be a purchase from a reputable seller like yourselves.. I have no idea about electronics and the last thing I wanna do is burn my wee shop down mate.. LMAO..

Hello Ryan, i have a problem with my CNC, it offsets the designed pice from the work pice in X, and Y axis sometimes 5, 6 cm and sometimes 3, 4 cm what am i doing wrong? i followed the steps you followed to the letter and it's not cutting correctly

OK so I have the XYZ Touch Probe and I understand that when I use it that it "sets" the XYZ Axis relative to the piece of material that I am working on. But in my Vectric Software, there is a reference to Z-Gap above material...should this be set to ZERO then since the Work coordinates have all been set to Zero by the Probe???

You're definitely from Essex because you sound like Russell Brand 😁

Is that bit OK to engrave say a football badge on slate

how did you connect the machine with your computer?